Dust control & spray
Nozzle adapters, strainers and fittings
Nozzle adapters, slip-lock connectors and fittings join misting nozzles and tubing in high-pressure mist and fog lines, available as straight, tee, elbow and push-fit types in brass and stainless steel.
Overview
High-pressure misting and fog lines are built from tubing, nozzle holders and connectors. Slip-lock connectors join lengths of tubing and fit nozzles into the line without threading, which simplifies installation and later changes to the layout. Straight connectors extend a line, tee connectors create branches or nozzle points, and elbows turn corners; push-fit versions allow quick assembly. Connectors are made in brass and stainless steel. The right fitting depends on tubing size and the pressure class of the system.
Selecting fittings
Match the fitting to the tubing outside diameter, the system operating pressure and the nozzle thread. Consider the environment for material choice, whether nozzle points need anti-drip valves, and how often the line may need to be re-routed or extended.
Range overview
- Types and variants
- Straight Slip-Lock Connector
- Tee Slip-Lock Connector
- Elbow Slip-Lock Connector
- Push-Fit Connector
- Materials and grades
- Brass
- Stainless Steel
- Size range
- 10 mm
- Connections and interfaces
- Slip-Lock
- Push-Fit
- Features
- Tool-Free Line Assembly
- Straight, Tee and Elbow Configurations
Exact specifications depend on the variant, material and size. Confirm ratings and certification against the datasheet or with our engineers before ordering.
Applications
- High-Pressure Misting Lines
- Fog Systems
- Mist Cooling Systems
- Dust Suppression Mist Lines
Information that speeds up a quotation
Share what you know. Anything you are unsure of can be marked “not known” — our engineers will help confirm it.
- Flow rate
- Pressure
- Pattern
- Angle
- Droplet size
- Material
- Connection
- Liquid
- Temperature
Need a datasheet?
Add this family to your enquiry list and mention the variant — we will send the relevant technical documents.
Industrial spray products
Related and alternative families
Flat fan spray nozzles
Flat fan spray nozzles produce a flat, sheet-like spray with a defined angle, used where liquid must be applied evenly along a…
Full cone spray nozzles
Full cone spray nozzles produce a solid, cone-shaped spray that covers a round or square area completely, used for gas cooling and…
Hollow cone spray nozzles
Hollow cone spray nozzles produce a ring-shaped spray with the liquid concentrated at the edge of the cone, giving fine atomisation at…
Air-atomizing spray nozzles
Air-atomizing spray nozzles mix liquid with compressed air to produce fine droplets at relatively low liquid pressure, used for coating, cooling, humidification…
Mist and dry-fog nozzles
Mist and dry-fog nozzles atomise water, or water with compressed air, into very fine droplets for dust suppression, fogging and humidification at…
Spiral spray nozzles
Spiral spray nozzles shear liquid off a series of spiral turns to form a full or hollow cone spray, giving high flow…
Frequently asked questions
What do I need to tell you when ordering misting fittings?
Give the tubing outside diameter, system operating pressure, the nozzle thread if nozzles fit directly into the connector, the quantities of each type (straight, tee, elbow) and the preferred material. If you are extending an existing system, a sample or photograph of the current fitting helps confirm compatibility.
Should I use brass or stainless steel fittings?
Brass is widely used for misting lines in many environments. Stainless steel may be preferred where water quality, outdoor exposure or a corrosive atmosphere is a concern, or to match stainless nozzles. The choice also depends on budget and appearance requirements.
Ready to specify nozzle adapters, strainers and fittings?
Send the details you have — quantities, sizes, drawings or a part number. Unknowns are fine.