Industries
Pharmaceutical and life sciences
Pharmaceutical and life-science facilities need clean, documented utilities and controlled environments. We support with water pre-treatment, humidity control, instrumentation, stainless-steel fabrication and internal material transport.
Process challenges
Common challenges on site
- Holding humidity within set limits in production and storage
- Pre-treatment of water feeding purified water systems
- Calibration and traceability of process instruments
- Stainless-steel parts and fabrication for process utilities
- Cleaning of tanks and vessels
- Moving materials between stores and production
Utilities and environment
Production and laboratory areas rely on controlled temperature and humidity, treated water, and instruments whose calibration status is known. Process utilities often use stainless-steel tubing, fittings and fabricated parts, and cleaning of vessels relies on suitable spray devices.
Regulated pharmaceutical water systems and clean areas are subject to qualification and validation by the manufacturer. Our role is to supply and engineer the equipment and to provide the documents you ask for; the qualification approach remains with your quality team.
Making an enquiry
Tell us the application, the quality or documentation requirements, the materials and surface finish you need, and the operating conditions. Be clear about which equipment sits inside a regulated system so we can say what can and cannot be supplied.
Typical use cases
- Industrial humidification with humidity controllers
- RO and ultrafiltration as pre-treatment stages
- Pressure transmitters, temperature sensors and calibrators
- Stainless-steel component fabrication
- Instrumentation tube fittings
- Tank cleaning nozzles
- Mobile-robot material transport
Products, solutions and services used in this industry
Industrial humidification systems
Industrial humidification systems add moisture to air using high-pressure fogging nozzles, or compressed-air dry fog, to hold humidity at the level a…
Humidity and temperature controllers
Humidity and temperature controllers switch misting and fogging systems on and off automatically from temperature and humidity readings, and can split large…
Industrial reverse-osmosis water plants
Skid-mounted reverse-osmosis plants that reduce dissolved salts in raw or pre-treated water to produce process water for boiler feed, pharmaceutical formulation, food…
Ultrafiltration water-treatment systems
Ultrafiltration and nanofiltration membrane systems that remove suspended solids, colloids, bacteria and, in the case of NF, part of the dissolved hardness,…
Pressure transmitters
Pressure transmitters measure gauge, absolute or differential pressure and send a proportional electrical signal to a controller or display. They are used…
Temperature sensors and transmitters
Temperature sensors such as thermocouples convert process temperature into an electrical signal, and temperature transmitters turn that signal into a standard output…
Pressure calibrators and manometers
Pressure calibrators and digital manometers are used to check mechanical and electronic pressure instruments against a reference. Calibration kits combine a pressure…
Stainless-steel component fabrication
Stainless-steel fabrication produces components, sheet-metal products and assemblies by CNC laser cutting, CNC bending and welding, for duties where corrosion resistance, hygiene…
Instrumentation tube fittings
Instrumentation tube fittings for small-bore process and analyser lines, covering connectors, unions, elbows, tees, plugs and adapters in stainless steel and nickel…
Tank cleaning nozzles and rotary heads
Tank cleaning nozzles and rotary heads clean the inside of process tanks, vessels and reactors in clean-in-place or manual cleaning, using rotary…
Mobile-robot material transport
Mobile-robot systems for routine internal transport of parts, totes, carts, medicines and supplies between workstations, stores, wards and docks, planned route by…
Related problems and solutions
Frequently asked questions
Can EKA Synergy share references from pharmaceutical sites?
Verified project references are shared on request, where the customer has agreed to it. Tell us about your plant and the problem you are working on, and we will tell you what relevant experience and documentation we can make available before you commit to anything.
Can you supply equipment for a validated system?
We can quote equipment and provide the documents you request, such as material certificates or calibration records where available. Qualification and validation are the responsibility of the regulated manufacturer, so please list your documentation requirements in the enquiry and we will confirm what can be provided.
Bring what you know. We’ll help structure the rest.
Share a part number, a drawing or simply the problem. Unknowns are fine — an engineer will review your enquiry.