Engineering. Products. Connected possibilities.

Fluid, piping & valves

Customized industrial valve assemblies

Customised valves and fittings made to customer drawings or specifications, including special needle valves, ferrule and tube fittings and high-pressure quick-release couplings, for applications that standard catalogue items do not cover.

Product familyValves and manifolds
Customised stainless steel ferrule fittings

Overview

Some instrument and process lines need a valve or fitting that is not in a standard range: an unusual end-connection combination, a special body length or porting, a different alloy, or a non-standard pressure class. This family covers parts made to the customer's specification rather than from a catalogue. Listed examples include customised needle valves, customised ferrule fittings in SS 304, 304L, 316 and 316L, customised tube fittings in stainless and carbon steel, and a 10000 psi quick-release coupling in sizes from 1/4 in to 2 in with threaded ends.

Specifying a custom part

A dimensioned drawing is the clearest starting point. If none exists, a sample, photograph or description of the mating parts helps. State the material, end connections, pressure and temperature, media, quantity and any testing or documentation needed, so the design and manufacturing route can be agreed.

Range overview

Types and variants
  • Customised Needle Valves
  • Customised Ferrule Fittings
  • Customised Tube Fittings
  • Stainless Steel Custom Fittings
  • 10000 Psi Quick-Release Couplings
Materials and grades
  • SS 304
  • SS 304L
  • SS 316
  • SS 316L
  • Carbon Steel
Size range
  • 1/4 in to 2 in
Pressure / temperature
  • 10000 psi working pressure (quick-release coupling)
Connections and interfaces
  • Threaded
  • Female Thread
  • Ferrule Tube Ends
Features
  • Made to Customer Drawing or Specification
  • Choice of Alloy and End Connections

Exact specifications depend on the variant, material and size. Confirm ratings and certification against the datasheet or with our engineers before ordering.

Applications

  • Gas Lines
  • Hydraulic Lines
  • Pneumatic Connections
  • Non-Standard Instrument Connections

Industries

  • Oil and gas
  • Chemical
  • Petrochemical

Information that speeds up a quotation

Share what you know. Anything you are unsure of can be marked “not known” — our engineers will help confirm it.

  • Valve type
  • Port
  • Flow direction
  • Pressure
  • Temperature
  • Cv
  • Material
  • End connection
  • Actuation
  • Standard

Need a datasheet?

Add this family to your enquiry list and mention the variant — we will send the relevant technical documents.

Valves and manifolds

Related and alternative families

Product family

Industrial ball valves

Quarter-turn ball valves for shut-off duty on oil, gas, water, air and fuel lines, from compact instrument valves to high-pressure models, in…

Valves and manifolds
Product family

Needle valves

Instrument needle valves for fine flow regulation and isolation on gauge, transmitter, sampling and process lines, machined from bar stock or forgings…

Valves and manifolds
Product family

Check valves

Check (non-return) valves that let flow pass in one direction and close automatically against reverse flow, from instrument-size poppet and piston check…

Valves and manifolds
Product family

Block valves

Block valves for isolating process connections to instruments and sample points, including single and double block-and-bleed valves, monoflange valves and block-and-bleed gauge…

Valves and manifolds
Product family

Bleed valves

Instrument bleed valves for venting trapped signal-line pressure to atmosphere before an instrument is removed or during calibration, used on multi-valve manifolds,…

Valves and manifolds
Product family

Double block-and-bleed assemblies

Double block-and-bleed assemblies and multi-valve manifolds that give two-barrier isolation with a vent between, for safe maintenance and calibration of pressure gauges,…

Valves and manifolds

Frequently asked questions

What do I need to send for a customised valve or fitting?

Send a dimensioned drawing if available, or a sample or photographs with key dimensions. Include material, end connections, working pressure and temperature, media, quantity and any inspection, testing or documentation requirements. Early discussion of tolerances and finishes helps avoid redesign later.

Can a standard product be modified instead of making a new design?

Often yes. Changing an end connection, material or length on an existing valve or fitting is usually simpler than a new design. Describe the standard item closest to your need and what must change, and the options can be discussed at quotation stage.

Ready to specify customized industrial valve assemblies?

Send the details you have — quantities, sizes, drawings or a part number. Unknowns are fine.