Cooling, humidity & air
Odour control misting systems
Odour control misting systems release a fine mist of water or an odour-neutralising solution along boundaries, over process areas or at specific sources to help control odours at waste, wastewater and industrial sites.
Overview
Odour control misting uses a pump, filtration and fine nozzles mounted on lines around a site perimeter, above tanks and process areas, or near specific odour sources. The mist carries water or a diluted neutralising agent into the air, where it can interact with odour-causing compounds and help reduce their spread beyond the site. Typical locations include landfills, waste transfer stations, sewage and effluent treatment plants, composting areas and industrial processes that release odours. Systems can run on timers, from sensors, or according to wind direction, and dosing equipment can add the treatment chemical at a controlled rate.
Selecting an odour control system
Consider the odour sources and their locations, site boundary and neighbours, prevailing wind, whether water alone or a treatment agent will be used, water quality, power supply and the control method. A site visit helps place lines where they will be most useful.
Range overview
- Types and variants
- Perimeter Odour Control Misting
- Source-Specific Odour Misting
Exact specifications depend on the variant, material and size. Confirm ratings and certification against the datasheet or with our engineers before ordering.
Applications
- Odour Control
Information that speeds up a quotation
Share what you know. Anything you are unsure of can be marked “not known” — our engineers will help confirm it.
- Area
- Dimensions
- Indoor outdoor
- Temperature
- Relative humidity (RH)
- Target RH
- Water quality
- Ventilation
- Power
- Maintenance
Need a datasheet?
Add this family to your enquiry list and mention the variant — we will send the relevant technical documents.
Cooling and humidification
Related and alternative families
Industrial high-pressure mist cooling
Industrial high-pressure mist cooling uses pumps and fine nozzles to release water mist that evaporates into the air, providing evaporative cooling and…
Indoor mist cooling
Indoor mist cooling uses high-pressure pumps and fine anti-drip nozzles to release micron-sized droplets that evaporate quickly, cooling and humidifying indoor spaces…
Outdoor mist cooling
Outdoor mist cooling uses high-pressure misting lines or mist fans to create a cooler, more comfortable microclimate in patios, gardens, resorts, outdoor…
Adiabatic condenser and VRF pre-cooling
Adiabatic condenser and VRF pre-cooling places a line of misting nozzles in front of air-cooled condenser coils, chillers or VRF outdoor units,…
Industrial humidification systems
Industrial humidification systems add moisture to air using high-pressure fogging nozzles, or compressed-air dry fog, to hold humidity at the level a…
Textile spinning and weaving humidification
Textile spinning and weaving humidification uses high-pressure pumps and overhead mist nozzle lines to hold humidity in ginning, pressing, spinning and weaving…
Frequently asked questions
What information is needed for an odour control misting proposal?
Share a site layout showing odour sources and the boundary, nearby receptors, prevailing wind directions, the treatment agent if one is already used, water source, power supply and preferred control method. Photographs of the areas where lines would be installed help plan routing.
Do I need a chemical agent or can water be used?
Some systems use water alone, while others dose an odour-neutralising agent into the water. The choice depends on the type of odour, site conditions and any restrictions on chemicals. If you already use or prefer a particular agent, let us know so compatibility with pumps and nozzles can be checked.
Ready to specify odour control misting systems?
Send the details you have — quantities, sizes, drawings or a part number. Unknowns are fine.