Instrumentation & measurement
Pneumatic cylinders
Pneumatic cylinders convert compressed-air pressure into linear motion for pushing, pulling, clamping and positioning in automated machines. The range covers compact single-acting micro cylinders and standard ISO profile cylinders.
Overview
A pneumatic cylinder consists of a barrel, piston, rod and end covers; compressed air applied to one side of the piston drives the rod out or in. Single-acting cylinders use air for one stroke and a spring for the return, while double-acting cylinders are powered in both directions. Dimensional standards fix mounting and key dimensions, so cylinders fit standard mountings and accessories. Micro cylinders to ISO 6432 have compact round bodies with threaded end covers, and profile cylinders to ISO 15552 (VDMA 24562) are used widely on automation equipment.
Selecting the right pneumatic cylinder
Work out the force needed from the load and the available air pressure, which gives the bore, then the stroke length. Decide single or double acting, the mounting style, rod end, cushioning and whether magnetic piston sensing is required. Operating pressure, ambient temperature and the air quality at the cylinder should also be confirmed.
Range overview
- Types and variants
- Single-Acting Micro Cylinders (ISO 6432)
- ISO 15552 Profile Cylinders
- Pressure / temperature
- Maximum Pressure 10 bar (Micro Cylinder)
- Connections and interfaces
- Threaded End Covers (Micro Cylinder)
- Standards referenced
- ISO 6432
- ISO 15552
- VDMA 24562
Exact specifications depend on the variant, material and size. Confirm ratings and certification against the datasheet or with our engineers before ordering.
Applications
- Industrial Automation
Industries
- Industrial automation
Information that speeds up a quotation
Share what you know. Anything you are unsure of can be marked “not known” — our engineers will help confirm it.
- Fluid
- Control range
- Voltage
- Pressure
- Port size
- Signal
- Certification
Need a datasheet?
Add this family to your enquiry list and mention the variant — we will send the relevant technical documents.
Pneumatic and process controls
Related and alternative families
Proportional flow controllers
Proportional flow controllers regulate flow continuously in response to a control signal, opening a valve by the amount needed rather than simply…
Pressure-independent control valves
Pressure-independent control valves (PICVs) combine a differential pressure regulator and a control valve in one body, so flow through a coil or…
Solenoid valves
Solenoid valves are electrically operated valves that open or close a line, or switch flow between ports, when a coil is energised.…
Air-line filters and regulators
Compressed-air line filters remove water, oil, dirt and odour from compressed air to protect valves, cylinders, instruments and other equipment downstream of…
Air dryers and filter elements
Compressed-air dryers remove water vapour from compressed air to prevent condensation in lines and equipment, and replaceable filter elements keep line filters…
Speed controllers and actuators
Valve actuators automate ball, butterfly and plug valves and dampers using air or electric power, and hydraulic speed controllers smooth and regulate…
Frequently asked questions
What information do you need to quote a pneumatic cylinder?
Send the bore and stroke, or the load and force needed with the available air pressure, single or double acting, the mounting style, rod end thread and any rod accessories, cushioning, and whether position sensing is needed. If you are replacing an existing cylinder, its standard (such as ISO 6432 or ISO 15552) and nameplate details help us match it.
What does ISO 15552 mean for a cylinder?
ISO 15552, which corresponds to the earlier VDMA 24562, defines mounting dimensions and key interfaces for standard pneumatic cylinders in common bore sizes. A cylinder built to it fits standard mountings and accessories, which makes replacement and machine design simpler. The bore, stroke and options still need to be specified, since the standard does not fix everything.
Ready to specify pneumatic cylinders?
Send the details you have — quantities, sizes, drawings or a part number. Unknowns are fine.