Engineering. Products. Connected possibilities.

Dust control & spray

Wind fence and windbreak barriers

Wind fences and windbreak barriers are perforated metal or fabric walls installed around stockyards and material handling areas to reduce wind speed across stockpiles and limit the spread of wind-blown dust.

Engineered solutionDust suppression systems
Perforated metal wind fence around a material storage yard

Overview

A wind fence works by passing part of the wind through a perforated panel and deflecting the rest, creating a sheltered zone of slower air behind it. Lower wind speed over stockpiles means less dust lifted from the surface and less material carried off site. Panels are made from perforated steel, galvanised, colour-coated, stainless or nickel-plated sheet with an electrostatic powder coat, or as a hybrid with HDPE fabric. Perforations can be round, oval or rectangular, and the wall is supported on a structural steel frame designed for the site's wind loads. Wind fences are usually combined with water-based suppression on the stockpiles themselves.

Selecting a wind fence

Key choices are fence height and length relative to stockpile size, panel material and coating for the site environment, hole shape and open area, foundation and support structure, and access gaps for vehicles and equipment. Local wind direction and speed data and the yard layout are needed for design.

Range overview

Types and variants
  • Perforated Metal Wind Fence
  • Hybrid Metal and HDPE Fabric Wind Fence
Materials and grades
  • Steel Sheet
  • Galvanised Sheet
  • Colour-Coated Sheet
  • Stainless Steel Sheet
  • Nickel-Plated Sheet
  • HDPE Fabric
Size range
  • Panel Length: 0.5–8.0 m
  • Panel Thickness: 0.6–1.0 mm
  • Hole Diameter: 6–10 mm
Pressure / temperature
  • Aperture Opening Rate: 30–40%
Features
  • Round, Oval or Rectangular Perforations
  • Electrostatic Powder Coating
  • Structural Steel Support Frame

Exact specifications depend on the variant, material and size. Confirm ratings and certification against the datasheet or with our engineers before ordering.

Applications

  • Coal Yards
  • Power Plant Stockyards
  • Mines
  • Ports
  • Material Storage Yards
  • Solar Farms

Industries

  • Power generation
  • Coal handling
  • Mining
  • Ports
  • Solar energy

Information that speeds up a quotation

Share what you know. Anything you are unsure of can be marked “not known” — our engineers will help confirm it.

  • Dust source
  • Material
  • Throughput
  • Enclosure
  • Water
  • Compressed air
  • Power
  • Moisture limit
  • Site layout
  • Target

Need a datasheet?

Add this family to your enquiry list and mention the variant — we will send the relevant technical documents.

Dust suppression systems

Related and alternative families

Engineered solution

Dry fog dust suppression

Dry fog dust suppression uses water and compressed air, atomised together through dry fog nozzles, to create a very fine fog that…

Dust suppression systems
Engineered solution

Wet sprinkler dust control

Wet sprinkler dust control applies water through a pressurised pipe network, sprinkler heads or rain guns to wet stockpiles, yards and haul…

Dust suppression systems
Engineered solution

Mist dust suppression

Mist dust suppression uses high-pressure pumps and fine misting nozzles to fill the air around a dust source with small water droplets…

Dust suppression systems
Engineered solution

Dust suppression at conveyor transfer points

Dust suppression at conveyor transfer points places spray, mist or dry fog nozzles at chutes, loading points and junction towers to control…

Dust suppression systems
Engineered solution

Crusher and screening dust suppression

Crusher and screening dust suppression controls dust at jaw, cone, impact and other crushers, screens, hoppers, chutes and stockpiles using water spray,…

Dust suppression systems
Engineered solution

Stockyard dust-control sprinklers

Stockyard dust-control sprinklers wet the surface of coal, ore, aggregate and other bulk stockpiles using fixed sprinkler networks, rain guns or fog…

Dust suppression systems

Frequently asked questions

What information is needed to design a wind fence?

Provide the yard layout, stockpile dimensions and heights, prevailing wind direction and speed data, ground conditions, required access openings and the preferred panel material or finish. This lets us propose fence height, length, panel type and the support structure and foundations.

How is the panel material chosen?

Galvanised or colour-coated steel suits many dry inland sites, while stainless or nickel-plated sheet may be considered for corrosive coastal or chemical environments. A hybrid with HDPE fabric reduces weight. The choice balances corrosion exposure, appearance, budget and maintenance access.

Ready to specify wind fence and windbreak barriers?

Send the details you have — quantities, sizes, drawings or a part number. Unknowns are fine.