Dust control & spray
Truck and wheel washing systems
Truck and wheel washing systems clean the tyres, wheels and undercarriage of vehicles leaving construction, mining and industrial sites, so that mud and dust are not tracked onto public roads.

Overview
A wheel wash sits at the site exit. As a vehicle drives onto the steel grating platform, sensors or an operator start a wash cycle in which nozzles direct water at the wheels, tyres and underbody; body-washing nozzles can be added. Wash water drains to a settling and recycling tank with filtration, so most of it can be reused and sediment removed periodically.
Types include drive-through, roller-based, high-pressure and portable units, and versions for two-wheelers, cars and heavy vehicles. Operation can be manual, timer-based or automatic through a PLC panel.
Selecting a wheel wash
Consider the vehicle types, lengths and axle loads, number of vehicles per hour, the kind of mud or dust carried, available space at the exit, water source, power supply, how sediment will be handled and whether a fixed or portable unit suits the duration of the project.
Range overview
- Types and variants
- Drive-Through Wheel Wash
- Roller-Based Wheel Wash
- High-Pressure Wheel Wash
- Portable Wheel Wash
- Truck Wheel and Body Wash
- Two-Wheeler and Four-Wheeler Wash
- Materials and grades
- Steel Grating Platform
- Size range
- Platform Length: 4–8 m
- Recycling Tank: 5,000–10,000 L
- Pressure / temperature
- Pump Pressure: 3–6 bar
- Pump Flow: 200–400 L/min
- Features
- Wheel, Tyre and Underbody Spray
- Optional Body Wash
- Water Recycling With Sediment Handling
- Self-Cleaning Filtration
- Anti-Slip Grating
- Manual, Sensor or Automatic Modes With PLC Panel
Exact specifications depend on the variant, material and size. Confirm ratings and certification against the datasheet or with our engineers before ordering.
Applications
- Construction Site Exits
- Mines and Quarries
- Coal Yards
- Cement and Steel Plants
- Ready-Mix Concrete Plants
- Landfills
- Logistics Yards
Industries
- Construction
- Mining
- Cement
- Steel
- Waste management
- Logistics
Information that speeds up a quotation
Share what you know. Anything you are unsure of can be marked “not known” — our engineers will help confirm it.
- Dust source
- Material
- Throughput
- Enclosure
- Water
- Compressed air
- Power
- Moisture limit
- Site layout
- Target
Need a datasheet?
Add this family to your enquiry list and mention the variant — we will send the relevant technical documents.
Dust suppression systems
Related and alternative families
Dry fog dust suppression
Dry fog dust suppression uses water and compressed air, atomised together through dry fog nozzles, to create a very fine fog that…
Wet sprinkler dust control
Wet sprinkler dust control applies water through a pressurised pipe network, sprinkler heads or rain guns to wet stockpiles, yards and haul…
Mist dust suppression
Mist dust suppression uses high-pressure pumps and fine misting nozzles to fill the air around a dust source with small water droplets…
Dust suppression at conveyor transfer points
Dust suppression at conveyor transfer points places spray, mist or dry fog nozzles at chutes, loading points and junction towers to control…
Crusher and screening dust suppression
Crusher and screening dust suppression controls dust at jaw, cone, impact and other crushers, screens, hoppers, chutes and stockpiles using water spray,…
Stockyard dust-control sprinklers
Stockyard dust-control sprinklers wet the surface of coal, ore, aggregate and other bulk stockpiles using fixed sprinkler networks, rain guns or fog…
Frequently asked questions
What information do you need for a wheel wash proposal?
Tell us the vehicle types, maximum length and axle load, expected vehicles per hour, the type of soil or material carried, space available at the exit, water source, power supply and whether body washing is needed. Also say whether the unit is for a fixed plant or a temporary project, as this affects the choice between fixed and portable designs.
How is wash water handled?
Wash water drains from the platform into a recycling tank where sediment settles and the water is filtered for reuse. The tank size, filtration and sediment removal arrangement are chosen to suit the vehicle numbers and the amount of mud carried. Periodic sludge removal is part of routine maintenance.
Ready to specify truck and wheel washing systems?
Send the details you have — quantities, sizes, drawings or a part number. Unknowns are fine.