Fluid, piping & valves
Hydraulic tube clamps
Hydraulic tube clamps in light, heavy and double-hole series for supporting and securing hydraulic tube and pipe runs, with polypropylene or polyamide clamp bodies and steel cover plates and screws.

Overview
Tube clamps hold hydraulic lines in position and reduce the vibration and noise transmitted along them. A typical clamp has two moulded body halves that grip the tube, a cover plate and locking screws, mounted on a weld plate or rail. Light series clamps suit smaller tube on lighter duty; heavy series cover tube from 6 mm to 32 mm OD; double-hole versions carry two lines side by side.
Clamp bodies are listed in polypropylene and polyamide, with steel, stainless steel and aluminium options, and carbon steel clamps in coated or galvanised finish. Locking screws range from M5 x 15 to M6 x 30.
Selecting tube clamps
Select by tube OD and series, then choose the body material for the operating temperature and environment. Decide the mounting arrangement, weld plate, rail or stacked, and whether single or double clamps are needed. Clamp spacing along the line should follow the system designer's guidance.
Range overview
- Types and variants
- Light Series Tube Clamps
- Heavy Series Tube Clamps
- Double-Hole Tube Clamps
- Carbon Steel Tube Clamps
- Materials and grades
- Polypropylene
- Polyamide
- Steel
- Stainless Steel
- Aluminium
- Size range
- Heavy Series: 6 mm to 32 mm Tube OD
- 1/2 in to 4 in
- Locking Screws: M5 x 15 to M6 x 30
- Connections and interfaces
- Bolted With Locking Screws
- Standards referenced
- DIN 3015
- Features
- Light, Heavy and Double-Hole Series
- Coated or Galvanised Steel Options
Exact specifications depend on the variant, material and size. Confirm ratings and certification against the datasheet or with our engineers before ordering.
Applications
- Securing Hydraulic Tube Runs
- Pipe Support on Machinery
- Vibration Control on Hydraulic Lines
Industries
- Automotive
- Construction
- Chemical
- Pharmaceutical
- Oil and gas
Information that speeds up a quotation
Share what you know. Anything you are unsure of can be marked “not known” — our engineers will help confirm it.
- Nominal size
- Pressure class
- Material
- End connection
- Standard
- Temperature
- Media
- Drawing
- Certification
Need a datasheet?
Add this family to your enquiry list and mention the variant — we will send the relevant technical documents.
Piping and hydraulic connections
Related and alternative families
Pipe fittings and flanges
Pipe fittings and flanges for process and utility piping, from butt-weld and forged fittings to slip-on, weld-neck, blind and threaded flanges, in…
Stainless steel butt-weld fittings
Stainless steel butt-weld pipe fittings, including bends, elbows, crosses and stub ends, for changing direction, branching or reducing welded process piping in…
Forged threaded and socket-weld fittings
Forged socket-weld and threaded pipe fittings for small-bore process lines, including elbows, couplings, half couplings, connectors, outlets and nipples in stainless, duplex…
Stainless steel seamless pipes and tubes
Stainless steel seamless and welded pipes and tubes for hydraulic, instrumentation and process lines, in 304 and 316 grades, with pickled, polished…
Hydraulic SAE flanges
Hydraulic SAE four-bolt flanges in Code 61 and Code 62 patterns, with one-piece flanges and split flange clamps for connecting hose ends,…
Quick-release couplings
Quick-release couplings for hydraulic and pneumatic lines, connecting and disconnecting hoses by hand with spring-loaded ball latching and valves that close automatically…
Related solutions and guides
Frequently asked questions
How do I choose between light and heavy series clamps?
Light series clamps suit smaller tube sizes and lighter duty. Heavy series clamps are larger and more robust, for bigger tube or where the line is subject to higher loads and vibration. Choose by tube OD and the conditions on the machine, and keep to one series within a mounting arrangement.
What should I send for a tube clamp quote?
List the tube or pipe OD for each clamp, the series, single or double-hole, the body material, the mounting arrangement and quantities. Mention the operating temperature and environment so a suitable body material can be confirmed. If clamps are replacing existing ones, a photograph or sample helps confirm the series and size.
Ready to specify hydraulic tube clamps?
Send the details you have — quantities, sizes, drawings or a part number. Unknowns are fine.