Fluid, piping & valves
Customized industrial valve assemblies
Customised valves and fittings made to customer drawings or specifications, including special needle valves, ferrule and tube fittings and high-pressure quick-release couplings, for applications that standard catalogue items do not cover.

Overview
Some instrument and process lines need a valve or fitting that is not in a standard range: an unusual end-connection combination, a special body length or porting, a different alloy, or a non-standard pressure class. This family covers parts made to the customer's specification rather than from a catalogue. Listed examples include customised needle valves, customised ferrule fittings in SS 304, 304L, 316 and 316L, customised tube fittings in stainless and carbon steel, and a 10000 psi quick-release coupling in sizes from 1/4 in to 2 in with threaded ends.
Specifying a custom part
A dimensioned drawing is the clearest starting point. If none exists, a sample, photograph or description of the mating parts helps. State the material, end connections, pressure and temperature, media, quantity and any testing or documentation needed, so the design and manufacturing route can be agreed.
Range overview
- Types and variants
- Customised Needle Valves
- Customised Ferrule Fittings
- Customised Tube Fittings
- Stainless Steel Custom Fittings
- 10000 Psi Quick-Release Couplings
- Materials and grades
- SS 304
- SS 304L
- SS 316
- SS 316L
- Carbon Steel
- Size range
- 1/4 in to 2 in
- Pressure / temperature
- 10000 psi working pressure (quick-release coupling)
- Connections and interfaces
- Threaded
- Female Thread
- Ferrule Tube Ends
- Features
- Made to Customer Drawing or Specification
- Choice of Alloy and End Connections
Exact specifications depend on the variant, material and size. Confirm ratings and certification against the datasheet or with our engineers before ordering.
Applications
- Gas Lines
- Hydraulic Lines
- Pneumatic Connections
- Non-Standard Instrument Connections
Industries
- Oil and gas
- Chemical
- Petrochemical
Information that speeds up a quotation
Share what you know. Anything you are unsure of can be marked “not known” — our engineers will help confirm it.
- Valve type
- Port
- Flow direction
- Pressure
- Temperature
- Cv
- Material
- End connection
- Actuation
- Standard
Need a datasheet?
Add this family to your enquiry list and mention the variant — we will send the relevant technical documents.
Valves and manifolds
Related and alternative families
Industrial ball valves
Quarter-turn ball valves for shut-off duty on oil, gas, water, air and fuel lines, from compact instrument valves to high-pressure models, in…
Needle valves
Instrument needle valves for fine flow regulation and isolation on gauge, transmitter, sampling and process lines, machined from bar stock or forgings…
Check valves
Check (non-return) valves that let flow pass in one direction and close automatically against reverse flow, from instrument-size poppet and piston check…
Block valves
Block valves for isolating process connections to instruments and sample points, including single and double block-and-bleed valves, monoflange valves and block-and-bleed gauge…
Bleed valves
Instrument bleed valves for venting trapped signal-line pressure to atmosphere before an instrument is removed or during calibration, used on multi-valve manifolds,…
Double block-and-bleed assemblies
Double block-and-bleed assemblies and multi-valve manifolds that give two-barrier isolation with a vent between, for safe maintenance and calibration of pressure gauges,…
Frequently asked questions
What do I need to send for a customised valve or fitting?
Send a dimensioned drawing if available, or a sample or photographs with key dimensions. Include material, end connections, working pressure and temperature, media, quantity and any inspection, testing or documentation requirements. Early discussion of tolerances and finishes helps avoid redesign later.
Can a standard product be modified instead of making a new design?
Often yes. Changing an end connection, material or length on an existing valve or fitting is usually simpler than a new design. Describe the standard item closest to your need and what must change, and the options can be discussed at quotation stage.
Ready to specify customized industrial valve assemblies?
Send the details you have — quantities, sizes, drawings or a part number. Unknowns are fine.