Water treatment
Cartridge filter systems
Cartridge filter housings and filter cartridges that remove fine particles from water and process liquids, used for RO pre-filtration, polishing, process water and pharmaceutical and food duties.

Overview
A cartridge filter system is a pressure housing that holds one or more replaceable elements. Housings are made in SS 304, SS 316 or SS 316L for process and hygienic duty, or in polypropylene or PVC for general water service, and take standard 10, 20, 30 or 40 inch cartridges. Configurations run from single-element housings to multi-cartridge vessels and jumbo 4.5-inch diameter housings for higher flow.
Cartridges include spun or pleated sediment elements and pleated microfiltration membranes in PES or PTFE. End fittings follow common codes such as DOE, 222 and 226, with seals in EPDM, silicone or FKM.
Selecting a cartridge filter system
Selection is driven by flow rate, the particle size to be retained, the liquid and its temperature and pH, operating pressure, and hygiene needs. These decide the housing material, number and length of elements, cartridge media and seal material. Also confirm connection type (threaded or tri-clamp), closure style, and the differential pressure at which elements will be changed.
Range overview
- Types and variants
- Single-Cartridge Housing
- Multi-Cartridge Housing
- Jumbo 4.5-Inch Housing
- Custom Housing
- Pleated Microfiltration Cartridge (PES)
- Pleated Microfiltration Cartridge (PTFE)
- Two-Stage Mainline Filter
- Materials and grades
- SS 304
- SS 316
- SS 316L
- Polypropylene
- PVC
- PES Membrane
- PTFE Membrane
- EPDM, Silicone or FKM Seals
- Size range
- 10, 20, 30 and 40 Inch Cartridge Lengths
- Microfiltration Retention 0.1–10 Micron
- Housing Flow up to 5 m³/h (10 in), 10 m³/h (20 in), 20 m³/h (40 in)
- Pressure / temperature
- SS Housings Operating Pressure 6–12 bar
- SS Housings up to 120 °C; PVC up to 60 °C
- PES Cartridges up to 85 °C, pH 2–12
- PTFE Cartridges up to 130 °C, pH 1–14
- Change Elements at About 0.8 bar Differential Pressure
- Connections and interfaces
- BSP Threaded
- NPT Threaded
- Tri-Clamp Sanitary
- DOE Cartridge Ends
- 222 Cartridge Ends
- 226 Cartridge Ends
- Features
- TIG-Welded Seams
- Swing-Bolt Lids
- Transparent Bowls (Plastic Housings)
- Hydrostatic Testing
- Mirror, Electropolished or Bead-Blast Finishes
- Integrity-Testable Membrane Cartridges
Exact specifications depend on the variant, material and size. Confirm ratings and certification against the datasheet or with our engineers before ordering.
Applications
- RO Pre-Filtration
- Purified Water and CIP Supply
- Juice and Syrup Clarification
- Fuel Polishing
- Acid and Solvent Filtration
- ETP and STP Polishing
Industries
- Water treatment
- Pharmaceutical
- Biotech
- Food and beverage
- Oil and gas
- Chemical
- Power generation
- Electronics
Information that speeds up a quotation
Share what you know. Anything you are unsure of can be marked “not known” — our engineers will help confirm it.
- Flow
- Mesh or micron
- Material
- Pressure
- Connection
- Water quality
Need a datasheet?
Add this family to your enquiry list and mention the variant — we will send the relevant technical documents.
Water treatment components
Related and alternative families
Sediment filters and micron cartridges
Sediment filters and micron-rated cartridges that strip sand, silt, clay and rust particles from borewell and process water, mainly as pre-filtration to…
Industrial stainless-steel filter housings
Stainless-steel cartridge filter housings in SS 304, SS 316 and SS 316L for water, chemical, beverage and pharmaceutical service, from single-element units…
FRP filtration vessels
Filament-wound FRP pressure vessels and storage tanks for sand and carbon filters, softeners, RO pre- and post-treatment, wastewater and fire-water storage, chosen…
Multi-cartridge filter housings
Multi-element stainless-steel filter housings that hold several cartridges in one pressure vessel, giving high flow rates for water, process liquids and CIP…
Big Blue filter housings
Jumbo filter housings in reinforced polypropylene that take 4.5-inch diameter cartridges, used for high-flow or sediment-heavy water in commercial buildings, light industry,…
RO membranes and consumable spares
Replacement RO, NF, UF and MF membranes and RO plant spares, including pumps, cartridges, pressure vessels, flow meters, valves and fittings, for…
Related solutions and guides
Frequently asked questions
What details are needed to specify a cartridge filter?
Provide the liquid, its flow rate, operating pressure and temperature, pH, the particle size to be removed, and whether the duty is hygienic or general. Mention the preferred housing material, connection size and type, and the cartridge end fitting if you already use a particular element, so the housing and cartridges can be matched.
How do I choose between PES and PTFE membrane cartridges?
PES is hydrophilic and is generally used for aqueous liquids such as water, beverages and pharmaceutical solutions. PTFE is hydrophobic and chemically resistant, so it suits aggressive solvents, gases and vent filtration, and tolerates higher temperatures. Share the fluid, temperature, pH and sterilisation method to confirm the right membrane.
Ready to specify cartridge filter systems?
Send the details you have — quantities, sizes, drawings or a part number. Unknowns are fine.